Two routers

[Justin Hileman]

Kyle Waters wrote:
> Justin Hileman wrote:
>> The key is to get the second WRT out of "router" mode and into 
>> "access point" mode. Do this by putting the uplink on a LAN port 
>> rather than the WAN port. Then you should disable the DHCP server on 
>> the second WRT. This keeps it from handing out IP addresses and 
>> NATing all your traffic.. 
>
> If you don't disable the DHCP server you may end up with some really 
> crazy errors.  I would disable the DHCP server first.

Ooh. Good call. Disable DHCP first, *then* plug the uplink into a LAN 
port :)

-- 
justin
http://justinhileman.com