Gentoo networking

[Russel Caldwell]

On 5/4/07, Chad <masterclc at gmail.com> wrote:
>
>
> So, boot up, log in as root, then type:
> modprobe -r e100
> modprobe e100
> dmesg
> This should unload the e100 module if it's loaded, then load it, and
> finally let you view the output from dmesg to see if there were any
> blaring errors with the module.  If there are none, you can then try:
> dhcpcd eth0


This was what I was missing. Thanks  to all.