Can't connect to WLAN

Byron Clark byron at theclarkfamily.name
Thu Jan 18 20:53:29 MST 2007


On Thu, Jan 18, 2007 at 03:28:35PM -0700, Daniel wrote:
> eth1      Scan completed :
>          Cell 01 - Address: 00:14:7C:5A:14:00
>                    ESSID:"ASD"
>                    Protocol:IEEE 802.11g
>                    Mode:Managed
>                    Frequency:2.462 GHz (Channel 11)
>                    Quality:0/100  Signal level:-80 dBm  Noise level:-256 dBm
>                    Encryption key:on
>                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
>                              9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
>                              48 Mb/s; 54 Mb/s
>                    Extra:bcn_int=100
>                    Extra:atim=0
>                    IE: WPA Version 1
>                        Group Cipher : WEP-104
>                        Pairwise Ciphers (2) : TKIP WEP-104
>                        Authentication Suites (1) : PSK

All the other answers you've gotten on this have told you how to set up
a WEP encryption key, but it sure looks like the network you want to
connect to is using WPA.  Here's how to set up a WPA connection on
debian/ubuntu.  Make sure you have wpasupplicant installed and add a
section like the following to /etc/network/interfaces and then run 'ifup
eth1':

iface eth1
    wireless-mode managed
    wpa-driver ndiswrapper
    wpa-ssid ASD
    wpa-psk YourWPAKeyHere

More information can be found in
/usr/share/doc/wpasupplicant/README.modes.gz

--
Byron Clark
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://plug.org/pipermail/plug/attachments/20070118/95e47905/attachment.bin 


More information about the PLUG mailing list