Need Partition Table GURU

[Dr. Scott S. Jones]

I have a linux drive, an SATA 80gb from Samsung. Somehow my partition table
has been HOZED...

I get the following error: 

root at 2[knoppix]# fdisk -l /dev/sda

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
   /dev/sda1   *           1          34      273073   83  Linux
   Partition 1 does not end on cylinder boundary.
   /dev/sda2              35        1007     7815622+   f  W95 Ext'd (LBA)
   /dev/sda3            1165        9729    68798328   83  Linux
   /dev/sda5              35         642     4883728+  83  Linux
   /dev/sda6             643        1007     2931831   83  Linux
   /dev/sda7            1008        1115      867478+  82  Linux swap /
   Solaris
   /dev/sda8            1116        1164      393561   83  Linux
   /dev/sda9            1165        9729    68798331   83  Linux



For whatever reaason, I can't seem to get the machine too boot on its own,
though I have it booted up with knoppix disk and I can mount and read from
and write to all the partitions, all the data appears to be intact.....

I ran gpart a few days ago, to bring back the partition table to the current
state. 

I need someone who is a partition guru to help me figure out how to get the
table set right so it will boot and run. 

Thanks, 

Scott